Upgrading or replacing your home’s heating system is a significant investment in comfort and energy savings. In Mt Lebanon, PA, where cold winters can strain an aging furnace, professional furnace installation ensures reliable warmth, optimal efficiency, and long-term peace of mind. Sureway Heating Cooling Plumbing offers specialized furnace installation services that combine precision sizing, premium equipment choices, certified workmanship, and local code expertise to deliver a heating solution tailored to your home’s exact needs.
Sureway Heating Cooling Plumbing follows a streamlined and detail-focused process for every furnace installation:
We begin with an on-site assessment of your existing heating system, ductwork layout, insulation levels, and usage patterns. This evaluation informs the sizing analysis and highlights any duct repair or sealing needs.
Using Manual J methodology, we calculate your home’s precise heating demand. Based on this data, we recommend the ideal furnace type, capacity, and efficiency level—balancing upfront cost against long-term savings.
Our technicians safely disconnect, dismantle, and haul away your old furnace, following EPA guidelines for refrigerant recovery (if applicable) and responsible recycling of metal components.
From mounting the new furnace on its secure pad to configuring gas line connections, vent systems, and combustion air intake, every step adheres to strict safety standards. We inspect and modify ductwork as needed to optimize airflow, eliminate leaks, and balance supply to each room.
After installation, we perform a thorough startup sequence: ignition testing, gas pressure checks, airflow measurements, and thermostat calibration. We then adjust dampers and registers to ensure even distribution of warm air throughout your living spaces.
Your Sureway Heating Cooling Plumbing technician will explain the new system’s operation, maintenance requirements, and thermostat programming. We leave your home clean and free of debris, ensuring minimal disruption to your routine.
A high-efficiency furnace with a quality installation by Sureway Heating Cooling Plumbing can reduce heating costs by 15–30%. Key factors include:
Recognizing the investment involved in a new furnace, Sureway Heating Cooling Plumbing offers a range of financing plans with competitive rates and flexible terms. Whether you prefer low-monthly, no down-payment arrangements or seasonal promotions, our goal is to make a high-quality heating solution accessible without compromising craftsmanship. Detailed financing information is provided during your consultation.
The Borough of Mt Lebanon requires permits for furnace installations, gas piping modifications, and venting adjustments. Our team:
To extend the life and performance of your new furnace, Sureway Heating Cooling Plumbing offers preventive maintenance plans that include annual safety checks, filter replacement reminders, heat exchanger inspections, and priority service scheduling. Extended warranties are available for parts and labor, providing further protection beyond the manufacturer’s standard coverage.
Typical installation projects range from $3,500 to $7,500, depending on furnace type, capacity, duct modifications, and required upgrades. During your free consultation, you’ll receive a transparent, itemized estimate.
Most residential furnace installations are completed within 6–8 hours, including equipment removal, duct adjustments, startup, and testing.
Purchasing equipment independently may seem cost-effective, but contractor-sourced systems ensure factory warranties, proper sizing, and compatibility with your existing ductwork. Sureway Heating Cooling Plumbing recommends selecting equipment through our team to guarantee optimal performance and coverage.
Clearances vary by model, but most installations require a minimum of 30 inches of frontal access and proper venting space. Our site evaluation confirms that your mechanical room or closet meets all manufacturer and code specifications.
Annual inspections, filter changes every 3 months, and periodic blower assembly cleaning preserve efficiency and prevent breakdowns. Our maintenance plan handles these tasks and alerts you when service is due.
A professional furnace installation is the foundation of a comfortable, energy-efficient home in Mt Lebanon, PA. With precise sizing, top-tier equipment, certified installation practices, and full local code compliance, your investment delivers dependable warmth and lower energy bills for years to come. To arrange an in-home assessment and detailed proposal, reach out to Sureway Heating Cooling Plumbing—your trusted local experts in comfort, efficiency, and safety.
Upgrading or replacing your home’s heating system is a significant investment in comfort and energy savings. In Mt Lebanon, PA, where cold winters can strain an aging furnace, professional furnace installation ensures reliable warmth, optimal efficiency, and long-term peace of mind. Our specialized furnace installation service combines precision sizing, premium equipment choices, certified workmanship, and local code expertise to deliver a heating solution tailored to your home’s exact needs.
• Precise Load Calculation: A furnace that’s too large or small can lead to short cycling, uneven heating, and wasted energy. Our certified technicians perform Manual J load calculations to determine the exact heating requirements of your Mt Lebanon home.
• Premium Equipment Selection: We partner with leading brands—Carrier®, Bryant® and other high-efficiency manufacturers—to offer gas, electric, condensing, and modulating furnaces with AFUE ratings up to 98.5%. Your new system will deliver consistent performance and lower utility bills.
• Certified Workmanship: As NATE-certified installers, our team follows industry best practices for venting, duct integration, combustion safety, and control wiring. Every installation is backed by manufacturer warranties and our commitment to quality.
• Local Code Compliance: Mt Lebanon’s building codes and permitting process can be complex. We handle permit applications, inspections, and ensure every aspect of your installation meets municipal and state requirements.
 We begin with an on-site assessment of your existing heating system, ductwork layout, insulation levels, and usage patterns. This evaluation informs the sizing analysis and highlights any duct repair or sealing needs.
 Using Manual J methodology, we calculate your home’s precise heating demand. Based on this data, we recommend the ideal furnace type, capacity, and efficiency level—balancing upfront cost against long-term savings.
 Our technicians safely disconnect, dismantle, and haul away your old furnace, following EPA guidelines for refrigerant recovery (if applicable) and responsible recycling of metal components.
 From mounting the new furnace on its secure pad to configuring gas line connections, vent systems, and combustion air intake, every step adheres to strict safety standards. We inspect and modify ductwork as needed to optimize airflow, eliminate leaks, and balance supply to each room.
 After installation, we perform a thorough startup sequence: ignition testing, gas pressure checks, airflow measurements, and thermostat calibration. We then adjust dampers and registers to ensure even distribution of warm air throughout your living spaces.
 Your technician will explain the new system’s operation, maintenance requirements, and thermostat programming. We leave your home clean and free of debris, ensuring minimal disruption to your routine.
A high-efficiency furnace with a quality installation can reduce heating costs by 15–30%. Key factors include:
Recognizing the investment involved in a new furnace, we offer a range of financing plans with competitive rates and flexible terms. Whether you prefer low-monthly, no down-payment arrangements or seasonal promotions, our goal is to make a high-quality heating solution accessible without compromising craftsmanship. Detailed financing information is provided during your consultation.
The Borough of Mt Lebanon requires permits for furnace installations, gas piping modifications, and venting adjustments. Our team:
• Prepares and submits all permit applications on your behalf
• Coordinates inspections with the local building department
• Documents compliance with zoning, mechanical, and fuel-gas codes
• Retains all records and ensures a smooth final approval
To extend the life and performance of your new furnace, we offer preventive maintenance plans that include annual safety checks, filter replacement reminders, heat exchanger inspections, and priority service scheduling. Extended warranties are available for parts and labor, providing further protection beyond the manufacturer’s standard coverage.
What does furnace installation cost in Mt Lebanon?
Typical installation projects range from $3,500 to $7,500, depending on furnace type, capacity, duct modifications, and required upgrades. During your free consultation, you’ll receive a transparent, itemized estimate.
How long does the installation take?
Most residential furnace installations are completed within 6–8 hours, including equipment removal, duct adjustments, startup, and testing.
Can I purchase the furnace myself?
Purchasing equipment independently may seem cost-effective, but contractor-sourced systems ensure factory warranties, proper sizing, and compatibility with your existing ductwork. We recommend selecting equipment through our team to guarantee optimal performance and coverage.
How much space do I need for a new furnace?
Clearances vary by model, but most installations require a minimum of 30 inches of frontal access and proper venting space. Our site evaluation confirms that your mechanical room or closet meets all manufacturer and code specifications.
What maintenance does a new furnace require?
Annual inspections, filter changes every 3 months, and periodic blower assembly cleaning preserve efficiency and prevent breakdowns. Our maintenance plan handles these tasks and alerts you when service is due.
A professional furnace installation is the foundation of a comfortable, energy-efficient home in Mt Lebanon, PA. With precise sizing, top-tier equipment, certified installation practices, and full local code compliance, your investment delivers dependable warmth and lower energy bills for years to come. To arrange an in-home assessment and detailed proposal, reach out to our team of heating specialists.
Contact Our Reliable & Experienced Team Members!
It's best to schedule professional inspections before the heating season begins, ideally in late summer or early fall, to ensure optimal performance and efficiency.
Regular filter changes improve air quality, enhance system efficiency, and reduce the risk of breakdowns. Filters should be checked monthly and replaced every three months.
Unusual noises, inconsistent temperatures, and increased energy bills may indicate underlying heating system problems. Professional inspections can help diagnose and resolve these issues.
Contact us to schedule or request an estimate on installation and replacements!
We are here to help. A person on our team will text you back! 🙌